92 SERIES
VERTICAL PLATE CLAMPS
92 Series

Standard plate clamps with safety lock

Working load limit (WLL) 500 - 3000kgs

These clamps are primarily used for transporting sheet metal and steel plates in the vertical position, as well as lifting and rotating through 1800.

They can also be used for transporting steel constructions and profiles.

It is recommended to use a pair of plate clamps in conjunction with a spreader beam for long materials which have a tendency to sag or flex.

Function

The jaw is opened and closed with the locking lever except for the 92-500 which uses a positive spring-loaded cam.

The safety lock spring loads the cam jaw, preventing the clamp from opening even when there is no load.

Workmanship and parts

These plate clamps are service-friendly, making it easy to exchange parts, which are readily available. Clamp repairs are available through the factory, or can be done by a competent person.

The 92-500 is equipped with positive spring-loaded cam, but comes without locking lever.

NB: The plate surface of the material must have a hardness level below HRC 30/Brinell 300.

Model WLL
kg*
Jaw (Z)
capacity mm
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
I
mm
Weight
kg**
92-500 50 - 500 0 - 16 99 195 29 33 47 50 48 11 15 1.5
92-1500 100 - 1500 0 - 20 126 225 50 49 70 82 55 13 20 3.0
92-2000 200 - 2000 0 - 32 192 312 80 75 96 100 81 20 24 8.0
92-3000 300 - 3000 0 - 32 192 320 80 75 96 100 81 30 30 12.0

PLEASE NOTE: Units are supplied as standard with a hook ring. Link fitting and chain are available on request as a special order. *Per clamp. **Weight per clamp with hook ring. ***Standard length of chain = 4-6 links.